2017029 ReefSkim 600 20180817

Inspiring Excellence in Fish Care!

2 M ONTHS OR AS R EQUIRED

Remove the Adjuster Gear. It may be necessary to gently lever it up with a screwdriver or similar tool.

Turn the skimmer the right way up. Remove the three body screws from the base.

Lift the Skimmer Body up from the Base Assembly. Put the body aside and take care to place it in a way that the Water Level Adjuster Rod is not broken.

Undo the Body Screw and remove the Bubble Deflector Plate

Undo the Body Screw and remove the rest of the Diffuser Chamber Assembly

Remove the Pump Bracket as shown.

If you need to completely separate the Pump from the Skimmer, turn over the Base Assembly and undo the Cable Clip to release the power cable.

Lift the Pump and Pump Mounting Plate out of the Base.

Remove the Pump Case Screws and the Impeller Cover.

11