IM 2211 Small Animal Starter Kit With Stand

Nurturing Best Friends!

Small Animal Starter Kit with Stand

Intended for small animals only. Parental supervision required, product contains small parts which can be a choking hazard.

All species have specific requirements for their care. Please seek advice from your Pet One retailer for correct care requirements and species compatibility.

Follow us on Social Media

Instruction version: 25/07/2024

Nurturing Best Friends!

What’s in the Box

2

3

1

9

5

4

10

11

6

12

7

13

8

1 Cage

8 Stand Wheels x4 9 Drink Bottle 750ml 10 Melamine Bowl

2 Access Door 3 Hay Feeder

4 Securing Clips x2

11 Igloo Hide 12 Critter Tunnel 13 Litter Pan

5 Base 6 Stand

7 Storage Rack

Carefully unpack the enclosure and stand making sure you keep all the packing material until all the parts of the product have been found and the product has been assembled. This product is shipped to you in a factory sealed carton. Should the product malfunction in any way or if the unit is damaged and requires replacement, contact the retailer where the product was purchased for inspection.

Nurturing Best Friends!

Assembly Instructions

Replace the bedding material weekly. If using a natural product such as Critters Comfort* you can dispose of the used substrate on the garden or compost.

Disassemble your kit by removing the Securing Clips and unpacking the kit contents. Food and water: Should be kept in separate containers. Ensure to keep food and water clean and fresh and free from contaminants.

1. Lift the Securing Clips as shown.

2. Add your bedding material* to the base of the hutch. Typically a natural product such as Critters Comfort* is used, as it can be composted in the garden.

3. Place the hide and Critter Tunnel at one end of the hutch to provide comfort and security for your pet. The hides helps reduce their stress level and encourages natural behaviours like nesting and burrowing.

4. Position The Litter Pan opposite hides, food and water. Encouraging natural behaviours will give your pet reasons to exercise and have fun.

5. Replace wire lid and secure lid to the base using the Securing Clips.

6. Open the lid and fill the bottle with fresh water until it overflows before closing the top. To prevent leaking, gently shake the bottle until water stops dripping freely; this will create a vacuum seal but still allow your pet access to clean water. Do not squeeze the bottle.

7. Place the hay feeder and bottle using the included mounts. Make sure it is at a height that your pet can reach. Check the bottle at least once per day, clean and top up when required. The bottle can be mounted, inside or outside the cage wire.

*Sold separately