IM | EziStat Thermostat

Next Best Thing to Nature!

Mount the EziStat Setting Up

Connecting the EziStat

Hang the EziStat in a convenient location using the Keyhole Mount. Ensure that there is ventilation around the EziStat to prevent overheating.

Feed the Probe into the enclosure. Secure it in the location where you wish to measure the temperature. See Hints and Tips,

Plug the heat source* into the Socket. Plug the Power Plug into the power point.

*Sold Separately

Never exceed 400W and 1.67A load as this will damage the EziStat and may create a fire hazard.

Setting the EziStat

When first turned on, the LED Display will flash a test pattern for a second and will then display the current measured temperature at the Probe.

To set the temperature, first press the Set Button and then use the Up and Down Buttons until the desired temperature is reached.

Press Set again or wait for 5 seconds to confirm the set temperature. The LED Display will then show the current measured temperature at the Probe.

Understanding the Power Indicator

The EziStat will switch

The EziStat will switch power off to the Socket when it reaches the temperature set. The Power Indicator will be GREEN.

power on to the Socket when the

temperature is below the set temperature. The Power Indicator will be RED.

4