IM | ClearView Hang on Filters

Inspiring Excellence in Fish Care!

Maintenance cont.

Take care not to lose small parts when servicing the filter, especially when cleaning components such as the Impeller at a sink. To avoid this is to clean small parts in a bucket* filled with some clean water so that any dropped parts are not lost.

Monthly

Unplug the Filter from the power supply.

Carefuly lift the Filter out of the aquarium and place it in a bucket*.

Remove the Dust Cover and drain the water out of the Filter. Remove the Filter media.

Remove and rinse the filter media, see Fortnightly page 8 .

Remove the entire Filter Inlet.

Grasp the Pump and twist anti-clockwise, then gently pull down to remove it from the Filter Body.

Remove the Impeller from the Pump and rinse.

Use a double-ended pipe brush* and clean the Impeller Well thoroughly.

Clean the Inlet U-Pipe and Extension Tube with a pipe brush*

Check and lubricate the O-rings, see Cleaning and Lubricating O-Rings page 10 .

Reassemble the Filter and position it back on the aquarium. Refill the body. Replace the Dust Cover.

Ensure your hands and plugs are dry. Plug the Filter in and turn the power on.

*Sold Separately

9