IM | Nautilus 2700 Canister Filter

Inspiring Excellence in Fish Care!

Arranging Fittings Setting Up cont.

This filter comes with a variety of fittings to allow customisation to suit specific aquarium requirements. Which fittings are chosen for the intake and the outlet depends on the situation and preferences, see What’s in the Box, page 5.

Standard Intake

Typical Spray Bar Arrangement

13

20 + 21

8

14

9

11

12

15

10

22

>5cm

22

20 + 21

16

Use this arrangement for almost all situations. Always use the Intake

The Spray Bar will give the best circulation in most circumstances. This arrangement is recommended unless it is not practical. Arrange the outlet so that the current creates a ripple effect at the surface. This will maximise the aeration of the water and contribute to a healthier environment for fish. Position it just below the surface to avoid any unnecessary splashing.

18

19

Strainer and ensure that it is clear of the substrate and anything that may be blocking the intake, such as plants. If the intake needs to be deeper, insert the Extension Pipe between the Intake Pipe and the Intake Strainer Adapter . 18 16 17

Quick Release Taps Settings

Locking Lever UNLOCKED Flow Valve CLOSED

Locking Lever LOCKED Flow Valve OPEN

Pull the Locking Lever upright to UNLOCK the Quick Release Taps and CLOSE the Flow Valve.

Press the Locking Lever back down to LOCK into the Pump Head when in position, and OPEN the Flow Valve.

10