IM | ReefSys 255 AquaSys 235 Cabinet

Inspiring Excellence in Fish Care!

Assembly Instructions cont. Step 10 Attach Left and Right Doors with Hinges as shown. x4 x24

Adjusting Hinges

Loosen

E

F

Tighten

Step 11 Place and tighten Support Leg Pins as shown.

Always ensure that the Support Leg is securely in place before filling the aquarium.

x4

NEVER remove the Support Leg unless at least half of the water has been removed from the aquarium. Take care when moving the Sump* that it does not contact any metal fittings. It is strongly recommended that the bottom Support Leg Pins are removed before moving the Sump*. *Sump with ReesfSys only.

Step 12 Fit the Support Leg Cams, see Using Pin and Cam Connectors , page 2. Position the Support Leg behind the Support Leg Pins as shown, then slide it forward into position. Secure the Support Leg Cams at the top and bottom.

L

4